We need to extend some of our timers

Use the Timers window to set timers.

1 Type information in the fields, to change timer settings, as needed:

 
Setting
Purpose
Forward Voice Mail On Timeout
When you enable a telephone's Forward to Mail feature, sets the duration of ringing before the system forwards a call to voice mail.
NOTE: If you set the time to be less than six seconds, caller ID information is not captured in voice mail.
Forward Voice Mail Off Timeout
When you disable a telephone's Forward to Mail feature, sets the duration of ringing before the system forwards a call to voice mail.
The system uses this setting as the default for each new user you add to the system. If you modify this value, the users you add after the change use the new value as the default. The users you added prior to the change are unaffected.
Individual users can modify the default setting in the Call Forward window of NBX NetSet utility by specifying the number of times the telephone rings before a call is forwarded.
Line Port Hold Timeout
For a call originating on an outside line, the length of time that the call remains on hold before it rings at the extension that placed the call on hold.
Call Park Timeout
The length of time that a call can be parked before it rings at the extension that parked the call.
Conference Timeout
The length of time before a conference attempt is abandoned. Applies to a blind conference only. The timeout takes effect under these conditions:
  • Two people, A and B, are involved in a call and one of them attempts to blind conference another person, C.
  • C does not answer and C's voice mail does not pick up the call.
After the Conference Timeout period, the system stops ringing C's telephone, stops attempting to conference with C, and reverts to the call between A and B.
Transfer Timeout
The length of time that a transferred call attempts the transfer before it rings at the extension that transferred the call.
TAPI Line Redirect Timeout
The length of time before a call redirected from a TAPI route point by an external application goes back to its original destination. After two failures, the call goes to the TAPI route point's call coverage option.
TAPI Line Redirect allows an external TAPI application, typically a call center application, to automatically reroute incoming calls based on caller ID information.
For more information, see TAPI Route Points.
Camp On Timeout
If using the Camp On feature, the length of time that a call can camp on a busy extension before the system returns the call to the extension that initiated the Camp On feature. The status of a camped-on call changes when the extension is free or the timer expires.
You can set the Camp On Timer in increments of 10 seconds. The default value for Camp On Timer is 180 seconds and the maximum value is 600 seconds.
Automatic Callback Timeout
The length of time that a call can be designated for call back before the call gets cancelled.
The Callback Timer has default value of 12 hours. You can set the timer to have a null value. If Automatic Callback is not returned in the specified time, Automatic Callback gets cancelled. A system reboot cancels the Automatic Callback on an extension.

2 Click Apply to make the changes, or click Reset to restore the settings to their original status.